home *** CD-ROM | disk | FTP | other *** search
- Path: news1.io.org!jmadge
- From: jmadge@io.org (Jeff Madge)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Removing on-board termination from GVP SCSI Controller
- Date: 27 Feb 1996 18:33:45 GMT
- Organization: Babylon 4
- Message-ID: <4gviq9$6tc@news1.io.org>
- NNTP-Posting-Host: zip.io.org
- X-Newsreader: TIN [version 1.2 PL2ovr]
-
- My apologies to anyone reading this post (more or less) twice, but I
- thought I'd have more luck if I brought it out of the previous thread
- (concerning zip drives).
-
- I have a gvp scsi controller that I am trying to get to work with a new
- zip drive. It appears that the problems I am having with the controller
- is that the scsi chain is being terminated before it gets to any external
- devices, and I have been advised to remove the termination from the scsi
- controller itself, the on-board harddrive, or both. Unfortunately, I
- have not been able to locate my manual anywhere (four years of moving
- back and forth to school.....), and I haven't been able to figure out
- what to do just by looking at the board.
-
- So, does anyone have experience with this board and feel up to giving
- some nice, step by step instructions?
-
- The board in question is:
-
- GVP Impact Series II Hard-Disk+RAM-Card
- Model A2000-HC811
- gvpscsi.device version 4.5
- board itself says: Series II, Rev II
- with a 120 meg Maxtor HD attached to the card
-
- Thanks for any help!
-
- Jeff
-
- --
- ------------------------------------------------------------------------------
- Jeff Madge |
- <jmadge@io.org> |
- | Finger for PGP Public Key
-